Skip to main content

What are the General Safety Guidelines in Industries

What are the General Safety Guidelines in Industries ?

In every organisation a set of rules must be well form to promote safety and employees and to prevent the direct and indirect cost of accident.

Following points should be taken into consideration while formulating safety rules:


  • The safety guidelines should be such that employees appreciate it and accept without any resistance.
  • The safety guidelines should be such that it does not cause of annoyance to an employee
  • The safety guidelines must be well defined.
  • The safety guidelines should be pace with changing environment and conditions.

Following points should be used as guidelines to workers and supervisor:


  • Smoking should be strictly prohibited particularly near chemical or combustible materials separate place will be available for smoking.
  • Personal protective equipment like safety classes respirators aprons shoes and gloves must be always use depending upon type of work.
  • Electrical connections and insulators should be check at regular intervals.
  • Electrical equipment must be operated by electric department persons only.
  • Safety Guards must be provided on all rotating parts such as pulleys, gears boxes, etc.
  • Loose dress must never be used while working on machine.
  • Material handling equipment should have unobstructed path for moment.
  • Place the tools at it's proper position.
  • Prompt first aid attention must be paid to any injured person.


Comments

Popular posts from this blog

Safety Slogans for Workplace that Avoid you from Accidents

Safety Slogans for Workplace that Avoid you from Accidents Here are the best collections of Safety Slogans for Workplace, that can avoid you from accidents.


Let's start reading list below mentioned of Safety Slogans in workplace, that can avoid you from accidents - Best listed Collections of Safety Slogans for Workplace  "A good safety culture is build over time it is never given"."Safety advisor is part of the team be sure he or she doesn't always mean"."If you give somebody and make sure there is a gloves on it"."If you are not safety conscious, you could end up unconscious, So Think About It"."If you are feeling beat because of the heat, do what you thought to and keep drinking water"."Pull in your hand when low beams are near, or your head could be forced into your rear"."Safety is the engine and you are the key that starts it"."Safety is this seam that joins the fabric of life. Don't let a loos…

Best Collections of Safety Slogans

Best Collections of Safety Slogans Here we are sharing few Best Collections of SafetySlogan, Safety Slogans in the Workplace.  Let's start reading list mentioned below.

List of Safety Slogans"Safety first safety always". - Charles M.Hays"Accidents are particularly Street and Highway accidents do not happen - they are causes". - Ernest Greenwood"Better a thousand times careful than once dead". - Proverb."Chance takers are accident makers"."For safety is not a gadget but a state of mind". - Eleanor Everest Freer"Hug your kids at home But belt them in the car". "Out of this nettle, danger, we pluck this flower, safety". - William_Shakespeare"Precautions is better than cure". - Edward_Coke"Prepare and prevent don't repair and repaent"."Safety doesn't happened by accident"."Safety is a cheap and effective insurance policy"."Safety means first aid to the uninjured&…

(NRV) Non-Return Valves | Check Valves - Symbol, Types and Importance

(NRV) Non Return Valve
A Non- Return Valves, check valve, clack valve, non- return valves, reflux valve, retention valve or one-way valve is a valve that normally allows fluid (liquid or gas) to flow through it in one direction only.
  Non - Return valve/ Check valve are two-port valves, meaning that they have two openings in the body, one to enter the fluid and the other to release the liquid.


Types of (NRV) Non - Return Valves There are various types of check valves/non-return valve used in a wide variety of applications.  Non- return valves are often part of common household items.  
Although they are available in a wide range of sizes and costs, Non - Return valve are generally very small, simple or inexpensive. Non - Return valve operate automatically and most are not controlled by an individual or any external control;  Accordingly, most have no valve handle or stem. The bodies (outer shells) of most  Non - Return valve/check valves are made of plastic or metal. Importance Conc…